top of page

Surveillance Multi-function CCTV Tester with 3.5in LCD Display

This multi-function tester will save you time - and money - on your very next CCTV installation. Not only can you see the camera video to adjust focus or the varifocal lens, but you can also power the camera directly from its lithium ion battery. That means only one trip up the ladder to mount the camera, test cables and adjust settings. Plus it's a complete multimeter and UTP cable tester - all in one tool.

PayPal ButtonPayPal Button

$195.00

Large 3.5" Color LCD

 

See what you've been missing with one of the largest color screens available on a tester! Perform real-time camera adjustments like focus and zoom, or tweak advanced settings like BLC or Sens-Up to adjust for lighting conditions.

Camera Power Output

 

Did you get to the job before the power company flipped the switch? No problem! Use the built-in 12VDC, 1A output and included cable to power the camera from the tester's internal battery. One trip up the ladder and you're done!

Digital Multimeter

 

It slices, it dices… this Ginsu of testers is a complete multimeter. Using the included probes you can check all of the following in a single convenient package: voltage, continuity, resistance, current, capacitance and diode. This is perfect for checking voltage drops over long cable runs to ensure you don't underpower your cameras.

UTP Cable Tester

 

If you use baluns or IP cameras, you'll love the built-in UTP tester. Just plug in the included adapter back at the head-end, then use the large LCD to confirm continuity and see pin mapping.

PTZ / OSD Control and Testing

 

Detailed on-screen camera setup options can be adjusted by using the RS-485 PTZ test mode. Directional controls adjust menu options for quick and easy setup. When using a true PTZ camera you can adjust pan, tilt, zoom, aperture, scan tests and configure camera presets. More than twenty PTZ protocols are supported including PELCO-D. Can't remember the camera or DVR's RS-485 address? A built in address search feature will find the attached device and report its address. In addition to RS485 it also supports RS232 and RS422 interfaces with baud rates ranging from 150 to 19200bps.

Video Pattern Generator

 

Built-in color bar generator for adjusting color in the DVR or calibrating CCTV monitors, also checking cables from the camera to the DVR.

Audio Testing

 

Need to confirm that a camera's microphone is working? Use the included adapter and listen to audio through the tester's built in speaker.

Ladder Friendly

 

We've spent many hours on ladders, so we've included features to help you get things done - while trying to not fall off. A carrying case is included to hold all the accessories  Plus there's a flip-out stand for setting on top of the ladder or workbench.

bottom of page